You might have noticed that FJC offers O-ring Lubricant (Part #2206). You may have also read the description pf this convenient aerosol spray: Use FJC O-ring Lubricant to decrease the surface friction of the o-ring, helping to prevent abrasion, pinching or cutting of the o-ring during installation. Lubrication also helps to seat the o-ring properly and aids in automated assembly processes.
What you likely haven’t seen ,however, is something which underscores the importance of this product, and o-ring lubrication in general. O-ring lubricant, also called “lube” or “grease”, extends the life of O-rings by creating a surface film which seals the o-ring and metal surface. In addition, it protects the o-ring against drying and cracking, which is the most common cause of A/C system leaks. The lubricant saturates the o-ring, causing a very minor swelling of the HNBR material. In this way, water and debris will be less likely to enter the system, and refrigerant will be less likely to escape.
Apply a thin, uniform film of lubricant over the entire surface of the o-ring every time you install one to help ease installation and seating of the o-ring. FJC’s convenient spray also helps get the lubricant into tight spaces.
Ideally a lubricant should maintain its consistency when in use. You will feel confident knowing FJC’s lubricant will sustain its viscosity and will never degrade the HNBR O-rings used in automotive A/C.